Heading
MARKFLOW GROUT 1
DESCRIPTION
MARKFLOW GROUT 1 is a specially formulatedcementitious grout based on specially processed cements containing 4illers and additives. It is supplied as ready to use dry powder. The grout can be used for gap thickness up to 100mm. It requires very low water demand which ensures high and early strength. For thickness greater than 75 mm the clean and washed aggregates of size 10 mm should be used(50% to 95% of the total quantity of grout used)
FEATURES / ADVANTAGE
- It has good pour ability and 4lowability
- It is non-shrink and has got positive expansion
- Rapid development of very high initial and 4inal strengths makes the right system
to support equipment that transfer very high static and dynamic loads
- It is free from harmful chlorides and other aggressive chemicals which attack steel and hence ensure non-corrosive supporting system
- It is easy to mix and apply as only water of a de4inite quantity has to be added as site to the readymade grout
- It has special additives and graded aggregates which are compatible with concrete substrates
- Pre-packed grout overcomes potentials on site batch variations
- Promotes rapid installations & early operation of plant
TYPICAL APPLICATIONS
- Base plates and bolt-pockets of turbo generators
- Columns in precast contractions
- Diesel generator sets
- Cement, textile and paper mill machinery
- Steel rolling mill beds
- Crane and transporter rails
- Concrete anchors
- Cavities, gaps and recesses