Heading
MARKPROOF IWL
DESCRIPTION
MARKPROOF IWL is a liquid integral waterproofing additive for cement concrete, plaster and mortar. It isspecially formulated additive composed of cement compatible, surface active components polymers and additives. It’s used as an additive for cement concrete/mortar/plaster & it makes concrete cohesive and prevents segregation. It reduces the permeability to water for cement sand mortars & concrete.
FEATURES / ADVANTAGES
- Increases workability of the concrete mix
- Reduces capillary action
- Reduces vapor transmission through walls and slabs
- Non-toxic
- Does not corrode the reinforcement
- Makes concrete water-light
- Reduces the permeability of mortar as well as concrete
- Reduces the rebound loss
- Requires very small dosages hence economical
TYPICAL APPLICATIONS
- Used in mass concrete
- Foundation walls
- Floors
- Cement stucco
- Masonry mortars
TYPICAL PROPERTIES
Nature : Single component, Liquid
Color : Pale yellow to Brownish
Specific Gravity at 30°C : 1.030±0.020 g/cc
Consistency : Low Viscous Liquid
Compatibility : Compatible with all types of admixtures & can be used with all
Portland cement grades
PH Value : Min. 9
Chloride content : Max. 2.00% (As per IS 2645: 2003)
Setting time, minutes : 30 – 600 min (As per IS 2645: 2003)
SPECIFICATION COMPLIES
- IS 2645-2003 & IS 9103-1999
DIRECTIONS FOR USE
DOSAGE
Stir well the material before use.
Dose of 100 ml to 200 ml per 50 kg bag of cement is usually sufficient to produce water-tight concrete or mortar. Actual dosages required for site mixes should be finalized after site trails. Dose can be increased to get maximum advantages by reducing the water content. Dose can be redesigned and tested by normal trial batch methods. Add MarkProof IWL to the mixing (gauging) water. Water content should be reduced accordingly to achieve the most effective waterproofing and strength of the concrete / mortar.
PRECAUTIONS
- Do not mix with dry cement.
- Add to mixing (gauging) water
.
PACKAGING
MARKPROOF IWL is supplied in 100ml, 200ml 1 liter, 5 liters, 20 liters, 200 liters
STORAGE & SHELF LIFE
Store the material at a cool & dry place (at 25°C. temp & 50% RH). Shelf life is 2 years.
HEALTH & SAFETY
- If it comes in contact with skin, mouth, eyes etc., wash it with plenty of water & if needed take medical advice. If accidentally gets ingested seek immediate medical attention. It is nontoxic.
- Do not reuse the containers for storage of consumable items for further information refers to the material safety data sheet. MSDS available on demand.
DISCLAMER
The above information and details herein are based on the tests conducted and experience on application and usage. The user is advised to carry out the test and take trails to satisfy on the suitability of the products and meeting his requirement considering the prevailing conditions prier to apply/using it on larger area. As the conditions under which the product are used or transported are beyond our control. We would not hold ourselves responsible on its consequential nonperformance.